Comments on: Samsung’s Legacy 3D HDTV Owners Get A Reprieve

By: WilThaPill

WilThaPill — Sun, 10 Apr 2011 23:24:18 +0000

Samsung can blind themselves with thier LED’s.
Becuase they’ll leave you hanging sooner, or later with them, as they did with the DLP’s.
Mitsubishi can stick thier EDID embeded codes with thier 3dc-100s adapters where the sun done shine.
Want ever buy any electroinc’s again,if the company’s name, starts with an “S, or M”.
It’s what’s wrong with the world today … it’s all about $$$. They can choke on that too, as far … as I’m concerned !!!

By: Bradley

Bradley — Sun, 28 Nov 2010 11:33:58 +0000

Help! I am totally out of it when it comes to all this technical jargon required for upgrades to a 3D capable output. I AM a Legacy owner of a Samsung HL-T5687SA. I have done some research and all roads lead to the Tru3D adapter kit upgrade. I need someone to tell me what devices will this upgrade give me (i.e. an emitter that does what, etc); what else do I need to buy to view 3D movies only( like a BluRay player, etc.); batteries for the glasses required; and any other cables and/or PC to make this system work. TIA!

By: Randy

Randy — Thu, 30 Sep 2010 20:11:54 +0000

GREG- did THIS over 4 months ago using THAT Player with YOUR Model Samsung LED/DLP. Make sure you set BDT-300 to “Checkerboard”, THEN Set to “Mode 2″ on your Samsung TV Rem- ote. Fiddle with “DynamiC/Standard” to minim- ize “ghosting” Getting 3-d to “pop-up” is MUCH easier with a 3-D (HDMI 1.4) Reciever. Our OLD 1.3 Receiver DID work, but was balky and sometimes frustrating to get 3-D to “POP”. Works like a charm NOW. Ya’ GOTTA get it work -ing because 3-D on (THESE) LED/DLP’s in noth- short of SPECTACULAR. BETTER than your loc-al Cinema. NO KIDDING !

By: William

William — Thu, 30 Sep 2010 20:10:52 +0000

Any update on this, anybody go for the DDD.com or the Tru3D?

which is best?

By: Greg30892

Greg30892 — Sun, 19 Sep 2010 13:02:32 +0000

Anybody hook their Samsung DLP to the new panasonic 3d bluray? (Samsung HL67A750 67″ (170cm) 1920×1080 (1080P) checkerboard 3D LED DLPPanasonic DMP-BDT300/350 3D Blu-ray player). I can’t seem to get the 3d popup on the tv to highlight – do I need to buy an emitter to plug into tv? The glasses are Xpand 3D Shutter Glasses btw. If anybody can help with setup thanx. greg30892@yahoo.com

By: Randy

Randy — Tue, 31 Aug 2010 18:22:54 +0000

This Tru3D Kit DOES work GREAT with our Sammy HL-67A750 67″LED/DLP. The Guys @ Tru3D bent over backward to get this to work with a MYRIAD of different TV’s, even walking us through setup after 9PM one NIGHT on the phone ! Some DirecTV 103 Programs have AMAZING Resolution/Color/and Depth…looks like HALF-a-MILE ! GOOD People!

By: John Smith

John Smith — Sat, 28 Aug 2010 15:06:01 +0000

Is True 3D at half resolution is not true 3D?
Think about it folks. Blu-ray 3D offer 1080 lines of resolution.

By: Mike

Mike — Wed, 25 Aug 2010 02:11:22 +0000

can you use the bdt300 to watch regular 3d movies and will the ssg 1000 glasses work with seeing 3d?

By: Ralph

Ralph — Mon, 09 Aug 2010 22:31:32 +0000

I have both the 67in Samsung and the 60in Mitsubishi tvs. Can this box be used on both. I hate to have to buy one for each tv.

By: Ryan

Ryan — Thu, 05 Aug 2010 02:15:11 +0000

It’s great to see that somebody is trying to take care of the customers that Samsung has left out in the cold. Too bad this device doesnt support my Samsung plasma TV, but hope that will change with updates or a future model!